2410T Injection Molding LDPE for Bottle Cap
LDPE 2410T is used for injection moulded applications Caps & Closures (Healthcare), Healthcare Applications, Medical Devices.
- Product Introduction
Product Description
2410T is low-density polyethylene grade with a good combination of flowability and softness. The grade is used by our customers for all types of injection moulded applications in the healthcare market.
Application
Caps & Closures (Healthcare); Healthcare Applications; Medical Devices
Market
Healthcare; Rigid Packaging
Processing Method
Injection Molding
Attribute
Ethylene Oxide Sterilisation; Fast Cycle (Production); High Flow; Low Density
|
Typical Properties |
Nominal Value |
Units |
Test Method |
|
|
Physical |
Melt Flow Rate, (190℃/2.16 kg) |
36 |
g/10 min |
ISO 1133-1 |
|
Density |
0.924 |
g/cm3 |
ISO 1183-1 |
|
|
Mechanical |
Tensile Modulus |
280 |
MPa |
ISO 527-1, -2 |
|
Tensile Stress at Yield |
11 |
MPa |
ISO 527-1, -2 |
|
|
Environmental Stress Crack Resistance |
0.5 |
hr |
ASTM D1693 |
|
|
Hardness |
Shore Hardness, (Shore D) |
49 |
0 |
ISO 868 |
|
Ball Indentation Hardness, (H 49/30) |
18 |
MPa |
ISO 2039-1 |
|
|
Thermal |
Vicat Softening Temperature, (A/50) |
89 |
℃ |
ISO 306 |
|
Peak Melting Point |
112 |
℃ |
ISO 11357-3 |
|
Product information
Notes
These are typical property values not to be construed as specification limits.
Processing Techniques
Recommended melt temperatures: 190 ℃ to 230 ℃.
Specific recommendations for resin type and processing conditions can only be made when the end use, required properties and fabrication equipment are known.
Hot Tags: 2410t injection molding ldpe for bottle cap, China 2410t injection molding ldpe for bottle cap manufacturers, suppliers, ldpe granules, ldpe transparent, ldpe resin, ldpe raw material, ldpe injection, LDPE Injection Molding
